Belkin F5D9010 - Manual (Page 26)

24
Using the Belkin Wireless Client Utility
24
Configuring your Belkin Wireless Notebook or Wireless Desktop
Network Card to Use Security
At this point, you should already have your wireless router or access
point set to use WPA or WEP. In order for you to gain wireless
connection, you will need to set your Wireless Notebook and Wireless
Desktop Network Cards to use the same security settings.
Connecting your Computer to a Wireless Router or Access Point that
Requires a 64-Bit or 128-Bit WEP Key
1.
Double-click the “Signal Indicator” icon to bring up the “Wireless
Client Utility” screen. The “More” button will allow you to view and
configure more options of your Card.
2.
Under the “Network List” window, click on a network name from the
available networks and click “Create”.
3.
Under “Security Settings” select “Low Security (WEP)”.
4.
Select from the following authentication choices:
• Shared Key Authentication
• Open Key Authentication