Bay Technical Associates RM356 - Manual (Page 92)

Reference Guide for the Model RM356 Modem Router
9-2 System Maintenance
Table 9-2 lists the fields for Menu 24.1 - System Maintenance Status. These fields are read-only
fields.
Table 9-2. System Maintenance Status Menu Fields
Field Description
Port: This field displays the WAN port number (1). For each channel the screen displays:
Status The remote node the channel is currently connected to, or the status of the channel
(Idle, Calling, or Answering).
Speed The current connecting speed.
TX Pkts The number of packets transmitted on this channel since reset or manual clear.
RX Pkts The number of packets received on this channel since reset or manual clear.
Errors The number of error packets on this channel since reset or manual clear.
Up Time The time that this channel has been connected to the current remote node.
Total Outcall Time The total outgoing call time for all WAN ports since the system has been powered on.
Ethernet: For the LAN port, the screen displays:
Status The current status of the LAN port.
TX Pkts The number of packets transmitted to the LAN.
RX Pkts The number of packets received from the LAN.
Collisions The number of collisions.
Name This field displays the name of your router, which you configured in
Menu 1 - General Setup.
RAS S/W Version The version of the current router software.
Ethernet Address The Ethernet MAC address assigned to your router.
LAN Packet Which
Triggered Last Call This field displays the first 48 octets of the LAN packet that triggered the last outgoing
call. Two types of packets are displayed: IP and RAW. By viewing the packet
information, you can determine which station has sent a packet to cause the router to
make an outgoing call.