Positioning your projector, Choosing a location – BenQ MP620p User Manual

Page 17

Positioning your projector

Choosing a location

Your projector is designed to be installed in one of four possible installation locations:

Floor in front of screen;

Ceiling in front of screen;

Floor at rear of screen;

Ceiling at rear of screen.

Your room layout or personal preference will dictate which installation location you select.
Take into consideration the size and position of your screen, the location of a suitable power
outlet, as well as the location and distance between the projector and the rest of your
equipment.

I. Floor front

Select this location with the projector placed near the
floor in front of the screen. This is the most common
way to position the projector for quick setup and
portability.

II. Ceiling front

Select this location with the projector suspended
upside-down from the ceiling in front of the screen.

Purchase the BenQ Projector Ceiling Mounting Kit
from your dealer to mount your projector on the
ceiling.

Set

the

Advance > Mirror menu after you turn

the projector on.

III. Floor rear

Select this location with the projector placed near the
floor behind the screen.

Note that a special rear projection screen is required.

Set

in the Advance > Mirror menu after you turn

the projector on.

IV. Ceiling rear

Select this location with the projector suspended
upside-down from the ceiling behind the screen.

Note that a special rear projection screen and the
BenQ Projector Ceiling Mounting Kit are required for
this installation location.

Set

in the Advance > Mirror menu after you turn

the projector on.