Philips AquaTrio Système d'aspiration et lavage - Manual (Page 12)

12
2
Push the lid unlocking slides forwards (away
from the handle) to unlock the lid and remove
the lid from the dirty water tank.
3
Pour the dirty water out. To prevent spilling,
always pour out from one of the corners of
the tank.
4
Rinse the empty dirty water tank and its lid
under the tap.
5
Place the lid back onto the dirty water tank
and pull the lid unlocking slides backwards
(towards the handle) to lock the lid.
2
To continue cleaning, press the nozzle
with your foot and release the appliance
from parking position.
3
Push the unlock slide forwards and press and
hold the power-on button. You can release the
unlock slide when the appliance switches on,
but keep the power-on button pressed during
cleaning.
5.4 Tank full/tank empty light
1
The tank full/tank empty light starts
flashing and the appliance stops operating
when the clean water tank is empty. Fill the
clean water tank (see chapter ‘Preparing for
use’, section ‘Filling the clean water tank’).
2
The tank full/tank empty light lights up
continuously and the appliance stops
operating when the dirty water tank is full.
Empty the dirty water tank (see section
‘Emptying the dirty water tank’ below).
5.5 Emptying the dirty water
tank
1
Pull up the lever to unlock the dirty water
tank and remove the dirty water tank.