Philips HAIRCLIPPER Series 1000 Tondeuse cheveux - Manual (Page 13)

- The built-in rechargeable battery contains
substances that may pollute the environment.
Always remove the battery before you discard
and hand in the appliance at an official collection
point. Dispose of the battery at an official
collection point for batteries. If you have trouble
removing the battery, you can also take the
appliance to a Philips service centre. The staff of
this centre will remove the battery for you and
will dispose of them in an environmentally safe
way.
removing the rechargeable battery
Only remove the rechargeable battery if it is
completely empty.
1 Disconnect the appliance from the mains and
let the appliance run until the motor stops.
2 Push the middle part of the cutting unit
upwards with your thumb until it opens and
then pull it off the appliance.
3 Remove the metal clip with a screwdriver.
4 Open the housing.
- Insert a screwdriver into one of the grooves next
to the socket for the appliance plug. Turn the
screwdriver to separate the two housing halves.
English 13