Philips HAIRCLIPPER Series 1000 Tondeuse cheveux - Manual (Page 11)

3 Cut the hair protruding from the comb or
fingers.
4 Continue this procedure and comb frequently
to remove cut hair and to check for unevenly
cut sections.
Cleaning
Clean the appliance after every use.
Never use scouring pads, abrasive cleaning agents
or aggressive liquids such as alcohol, petrol or
acetone to clean the appliance.
1 Make sure the appliance is switched off and
disconnected from the mains.
2 Remove the comb attachment.
3 Push the middle part of the cutting unit
upwards with your thumb until it opens and
then pull it off the appliance.
4 Clean the cutting element and the inside of the
appliance with the cleaning brush supplied.
English 11