Philips Grind & Brew Cafetière - Manual (Page 9)

9
D Note:
When you switch off the grinder, the number
of cups and the strength setting are not
shown on the display.
7
Follow steps 11 to 13 in section ‘Using coffee
beans’.
5.4 Setting the timer
The timer enables you to program the time for
starting the coffee-making process.
1
Keep the PROGRAM button pressed until
the program button starts flashing and 0:00
appears on the display (Fig. 22).
2
Press the HOUR button repeatedly to set the
hour. (Fig. 23)
• The appliance beeps each time you press
the button.
3
Press the MINUTE button repeatedly to set
the minutes. (Fig. 24)
• The appliance beeps each time you press
the button.
• The display shows the set timer time.
4
Select the number of cups you want to
brew. (Fig. 25)
5
Select the desired coffee strength (mild,
medium or strong). (Fig. 26)
6
Press the PROGRAM button to save the
settings. (Fig. 27)
• The PROGRAM button lights up
continuously.
• The clock time appears on the display.
7
To interrupt the process, press the
PROGRAM button again.
• The PROGRAM button light goes out.
D Note:
If you want to change the set timer time, press
the PROGRAM button. The PROGRAM button
indicator starts flashing again. Now you can set
the new timer time by pressing the HOUR and
MINUTE buttons.
D Note:
If you want to brew coffee with ground coffee,
press the pre-ground coffee button to switch off
the grinder before you select the number of cups.
• The grinder grinds the required amount of
coffee beans.
• The freshness indicator flashes rapidly on
the display until the brewing process is
finished.
• The coffeemaker beeps 5 times when the
brewing process is finished.
12
Wait until the coffeemaker has stopped
beeping before you remove the jug.
D Note:
After brewing, coffee drips from the filter
basket for several seconds.
• The freshness indicator flashes slowly on
the display for 30 minutes after brewing, to
indicate that the coffee is fresh. (Fig. 20)
13
To pour out coffee, turn the lid to the ‘pour’
position. In this position, the arrowhead on
the lid points to the ‘pour’ symbol on the
rim (Fig. 21).
D Note:
To keep the coffee hot, always close the lid
after pouring out.
5.3 Using pre-ground coffee
If you want to use pre-ground coffee instead of
coffee beans, follow the steps below.
1
Follow steps 1 and 2 in section ‘Using coffee
beans’.
2
Put pre-ground coffee in the paper filter.
D Note:
How much pre-ground coffee you use is a
matter of personal taste. For a medium-strong
cup of coffee, use one measuring spoon
(approximately 6g) for each cup (125ml).
3
Close the filter basket holder.
4
Turn the lid of the jug by its lever to the
‘closed/brewing’ symbol on the lid. Put the jug
in the appliance.
5
Press the start/standby button.
• The appliance beeps and the display lights up.
6
Press the pre-ground coffee button to switch
off the grinder (Fig. 8).
• The button lights up when you press it.
ENGLISH