Philips Téléviseur - Manual (Page 53)

3
1 2
MENU
” P
5 6 4
8 7 9
0
3
- -
+ +
.
[
Á
- ª
` ù
SMART SMART
RADIO
Ë
¤
ı Y
Remote control keys
Sound mode
Used to force programmes in
Stereo and Nicam Stereo to Mono
or, for bilingual programmes, to
choose between
Dual I or Dual II .
The Mono indication is red when in
forced position.
16:9 Format (p. 9) Sleeptimer
To select the length of time before
the set automatically switches to
standby (from 0 to 240 minutes)
Smart picture and sound
Used to access a series of
predefined picture and sound
settings.
The
personal position relates to
settings selected from the menus.
TV / Radio (p. 9)
Press one of these keys to switch
the television between TV or
radio mode.
PC : unused key.
Menu
To call up or exit the menus.
Select peripherals (p.4)
Press several times to select the
required EXT connector.
Most equipment (decoder, video
recorder) carries out the switching
itself.
Cursor
These 4 keys are used to move
around the menus.
Volume
To adjust the sound level
Mute
To mute or restore the sound.
Screen information
To display / remove the programme
number, the time, the sound mode
and the time remaining on the timer.
Hold down for 5 seconds to
permanently display the programme
number on the screen.
Standby
To set the TV to standby mode.To
switch the TV set on again, press
b , P @ # or 0 9 .
Teletext (p. 8)
Surround Sound
To activate / deactivate the surround
sound effect. For models equipped
with Virtual Dolby Surround*, you
can experience Dolby Surround Pro
Logic sound effects.
Selecting TV programmes
To move up or down a programme.
The number and the sound mode are
displayed for a few seconds.
For some TV programmes the title of
the programme appears at the
bottom of the screen.
Previous programme
To access the previously viewed
programme.
Numerical keys
For direct access to programmes.
For a 2 digit programme number,
the 2
nd digit must be entered
before the dash disappears.
* Manufactured under license from Dolby Laboratories.“Dolby” and the double-D symbols are trademarks of Dolby Laboratories.
List of programmes
To display / clear the list of
programmes. Use the keys îÏ to
select a programme and the key ¬ to
display it.