BT 4100 SMS - Manual (Page 63)

63
BT Freestyle 4100 – Issue 2 – Edition 3 – 12.01.04 – 5853
2 Use and to select the handset you want to
transfer the call to, then press OK. Alternatively, just
press the number of the handset you want, e.g. press
for handset 2. The external caller is put on hold and
the called handset rings.
3 When the second handset answers you will be able to
speak to them without the external party hearing. To
transfer the call just hang up on the originating handset.
3-Way calls
During an external call:
1 Press , the display shows Call Handset and the other
handset numbers.
2 Use and to select the internal handset you want,
then press OK. Alternatively, just press the number of
the handset you want, e.g. press
for handset 2.
The external caller is put on hold and the internal handset
rings.
3 When the internal handset answers you will be able to
speak to them without the external party hearing.
4 You can now speak to either party individually, pressing
Switch to alternate between the two, or press Join to hold
a 3-way call. Either handset can leave the call at any time
by hanging up.
2
ᮢ ᮡ
Int
2
ᮢ ᮡ
Additional handsets and bases
If the other handset does not
answer you can stop the ringing
and retrieve the original call by
pressing Switch.
You cannot use the button
until the call timer is shown in
the display.
Int
If the other handset does not
answer you can stop the ringing
and retrieve the original call by
pressing Switch.
5853 BT Freestyle 4100 UG [3] 12/1/04 12:47 pm Page 63