Belkin N1 WIRELESS ROUTER P75170EI - Manual (Page 40)

36
Alternate Setup Method
36
s
e
c
tio
n
2
1
3
4
5
6
7
8
9
10
4. User Decide Login Server Manually
If your login server IP address is not available in the “Select Your
State” drop-down menu
(1) , you may manually enter the login
server IP address by placing a check in the box next to “User
decide login server manually” and type in the address next to
“Login Server”
(5) .
Setting Custom Domain Name Server (DNS) Settings
A “Domain Name Server” is a server located on the Internet that
translates Universal Resource Locaters (URLs) like “www.belkin.com”
to IP addresses. Many Internet Service Providers (ISPs) do not require
you to enter this information into the Router. The “Automatic from
ISP” box
(1) should be checked if your ISP did not give you a specific
DNS address. If you are using a static IP connection type, then you may
need to enter a specific DNS address and secondary DNS address for
your connection to work properly. If your connection type is dynamic or
PPPoE, it is likely that you do not have to enter a DNS address. Leave
the “Automatic from ISP” box checked. To enter the DNS address
settings, uncheck the “Automatic from ISP” box and enter your DNS
entries in the spaces provided. Click “Apply Changes”
(2) to save
the settings.
(1)
(2)