beautypg.com

5operation, 6technical specifications, 7troubleshooting – Philips Power2Charge User Manual

Page 4: 8maintenance, 9need help

background image

4

ENGLISH

5

Operation

Charging devices - preparation

Check the maximum input voltage (V DC) of the
device you wish to connect. For this see the user
manual that came with the device.
Make sure the device does not consume more current
(mA) than 450 mA.
Check what connector tip is required for your device.
See the compatibility sheet for the proper tip for your
device.

Charging 5V devices (fig. B)

Insert the USB tip of the USB cable into the
USB port (2).
Connect the connector tip to the USB cable.
Insert the power tip into the cigarette lighter jack in
your car.
> The LED indicator lights up when a device is

charging.

> The LED indicator will flash when the device is fully

charged.

Disconnect the device from the USB car adapter.
Disconnect the USB adapter from the cigarette lighter
jack.

6

Technical specifications

• Rated input: 10.8V - 24V DC
• Rated output: 5.6V DC, max. 450 mA
• Operating temperature: 0ºC - 45ºC
• Size: 91.7 x 32.7 x 32.7 mm (h x w x d)
• Weight: 30 g

7

Troubleshooting

Problem
– Possible cause
• Solution

USB car adapter does not charge connected device
– Voltage of device does not correspond with that of the

USB car adapter.

• Refer to the user manual that came with the device.
– Improper connection between device and USB car adapter.
• Make sure that the USB cable is properly inserted into

the device and the USB car adapter.

– Improper connection between USB car adapter and cigarette

lighter jack.

• Check that power tip is properly inserted into the

cigarette lighter jack.

– Damaged USB cable or connector tip.
• Replace USB cable and/or connector tip.
– Wrong connector tip used.
• Check connector tip and replace if necessary.
– Non supplied USB cable/connector tip used.
• Replace with supplied USB cable/connector tip.
– Problems with electrical circuit of USB car adapter.
• Take the USB car adapter to your local distributor.

8

Maintenance

• Use a soft, lint-free cloth to clean the USB car adapter

exterior. Do not use harsh chemicals, cleaning solvents
or strong detergents.

• When any problems occur with the USB car adapter or

the accessories, take the adapter and accessories to your
local distributor.

9

Need help?

Online help: www.philips.com/welcome
For interactive help and frequently asked questions.

5

4

3

2

1

3

2

1

SCM4380 12-09-2007 12:42 Pagina 4