Philips Purificador de aire - Manual (Page 7)

K Control panel
1 Light sensor for night mode
2 Air quality on/off button with light
3 Power on/off button
4 Silent mode button with light
5 Power-on light
6 Fan speed button with light
7 Auto mode button with light
8 Fan speed lights (1, 2, 3 and boost power)/filter replacement lights
9 Replacement/lock light
10 Fan speed indications
11 Filter replacement indications
l Filter 4: HEPA filter
M Filter 3: activated carbon filter
n Filter 2: formaldehyde filter (supplied with AC4074) or multi-care filter
(supplied with AC4072)
o Filter 1: pre-filter
p Front panel
important
Read this user manual carefully before you use the appliance and save it for
future reference.
Danger
- Do not let water or any other liquid or flammable detergent enter the
appliance to avoid electric shock and/or a fire hazard.
- Do not clean the appliance with water or any other liquid or a
(flammable) detergent to avoid electric shock and/or a fire hazard.
Warning
- Check if the voltage indicated on the bottom of the appliance
corresponds to the local mains voltage before you connect the
appliance.
- If the mains cord is damaged, you must have it replaced by Philips, a
service centre authorised by Philips or similarly qualified persons in
order to avoid a hazard.
- Do not use the appliance if the plug, the mains cord or the appliance
itself is damaged.
- This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety.
- Children should be supervised to ensure that they do not play with the
appliance.
- Do not block the air inlet and outlet, e.g. by placing items on the air
outlet or in front of the air inlet.
Caution
- This appliance is not a substitute for proper ventilation, regular vacuum
cleaning or use of an extractor hood or fan while cooking.
- If the wall socket used to power the appliance has poor connections,
the plug of the appliance becomes hot. Make sure you plug the
appliance into a properly connected wall socket.
English 7
4222.003.4042.1.indd 7 18-09-09 14:17