Philips TransDock micro - Manual (Page 9)

9
EN
G
LI
SH
Tips for manually finding an empty station:
• Be sure to search the entire spectrum of
FM frequencies.
• When using scan/seek on your car’s radio, if your
tuner stops on 101 and then jumps to 103, look
in the 102 frequencies for empty stations.
•Try tuning to a strong station, then backing down
two frequencies - for example 103.5 to 103.1.You
can often find empty frequencies this way.
D
Note: If that frequency is taken, scan to the
next station and try again.
Settings and features
To enter the Settings Menu press and hold your
PhilipsTransDock micro dial until the display flashes
“Settings”.Then, turn the dial to scroll through the
various Settings, and press the dial to enter your desired
Setting.Turn the dial to the right or left to view the
chosen Settings options, and press the dial to confirm
your selection. Once you’ve made your selection, you
will return to the Settings Menu. Press the center button
to exit the Settings Menu.
D
Note: Your PhilipsTransDock micro will
automatically exit the Settings Menu after a few
seconds of inactivity.
Preset Store
Preset Store allows you to save up to four preset
stations.The default presets are 88.1, 94.9, 100.9,
and 107.9.
To store your own preset stations, follow these simple
steps:
1. Using the dial, tune PhilipsTransDock micro to the
station you’d like to set – turning right to tune to
higher stations and left to tune to lower stations.
2. Press and hold the dial to enter the Settings Menu.
3. Once in the Settings Menu, scroll to Preset Store
and press the dial to select. Next, scroll to and
select the preset number (SET 1, SET 2, SET 3,
or SET 4) and press to select.
4. Repeat steps 1-3 to store the remaining presets.
D
Note: Your new preset will override the preset
that was last saved, including the default presets.
Preset Mode
Preset Mode gives you the option to scroll through
your presets in Manual Mode.
To turn Preset Mode on, follow these simple steps:
1. Press and hold the dial to enter the Settings Menu.
2. Scroll to Preset Mode and press the dial to select.
Then choose Preset Mode On and press to select.
Now you can scroll through the four presets (P1,
P2, P3, P4) in Manual Mode.