Philips Mando a distancia universal - Manual (Page 11)

5. Troubleshooting
• Problem
– Solution
• The indicator LEDs (TV, SAT, DVD/VCR and AMP) blink four times after
every key press.
– The remote control is indicating that its battery is running low. Replace the old
battery with a new CR2025 Lithium battery.
• The device you want to operate does not respond and it’s LED
(TV, SAT, DVD/VCR, AMP) does not flash when you press a key.
– Replace the old battery with a new CR2025 battery.
• The device you want to operate does not respond but it’s LED
(TV, SAT, DVD/VCR, AMP) does flash when a key is pressed.
– Point the SRU740 at the device and make sure that there are no
obstructions between the SRU740 and the device.
• The SRU740 does not respond properly to commands.
– Maybe you are using the wrong code. Try programming the SRU740 again
using another code, which is mentioned under the brand of your device, or
reset for automatic search to find the right code.
If the device still does not respond, call our helpline.
– Press the subtitling-key to get Teletext pages on your screen.
• The Teletext keys do not work.
– Find out whether your TV is equipped with Teletext.
• You have difficulties operating all of the functions on your device.
– Maybe the SRU740 has to be adapted to the model of the device.
Call our helpline for details.
• Your brand of device is not in the code list.
– Try to set the SRU740 automatically.
See ‘Automatically setting the remote control’.
• None of the codes works during manual setting of the remote control.
– If that is the case, follow the instructions under
‘Automatically setting the remote control’.
6. Need help?
If you have any questions about the SRU740/10, you can always contact us.
You will find our contact details after the code list at the back of this manual.
Read this manual carefully before you make a call.You can solve most of the
problems yourself. If you cannot find any answers to your problems, write
down the details of your device shown in the code list at the back of this
manual.This will help our operators to assist you better and more quickly.
Look up the numbers of the models in the instructions accompanying the
device or on the back of your device. When you call our helpline, make sure
the device is to hand so that our operators can help you determine whether
your remote control is working properly.
The model number of your Philips universal remote control is SRU740/10.
Date of purchase: ......../......../........
(day/month/year)
11
Instructions for use
English
SRU740_10_v2.qxd 26-04-2005 15:19 Pagina 11