Philips Mando a distancia universal - Manual (Page 10)

10
Frequently asked questions
ENGLISH
5 Frequently asked questions
In this chapter you find answers to the most frequently asked questions
about your universal remote control.
How do I set the remote control for combo devices (TV/VCR,
TV/DVD, DVD/VCR, etc)?
Some combo devices require you to set up two different source selection
keys to control both parts of the combo device. For example, if you have
a TV/DVD combo, you might need to set up one code under the TV key
to control the TV and a separate code under the DVD key to control the
DVD.
The device I want to operate does not respond and the mode
key (TV, STB or DVD) does not flash when I press a key.
Replace the old batteries with two new AAA batteries.
The device I want to operate does not respond but the mode
key (TV, STB or DVD) does flash when a key is pressed.
Point the SRU 5130 at the device and make sure that there are no
obstructions between the SRU 5130 and the device.
The SRU 5130 does not respond properly to commands.
Try programming the SRU 5130 again.
If the device still does not respond, call our helpline.
The Text TV keys do not work.
• Find out whether your TV is equipped with Text TV.
• Maybe the SRU 5130 has to be adapted to the model of the device.
Call our helpline for details.