B&K AVR101 Series - Manual (Page 42)

exit menu system MENU MENU 10
return to main menu MENU MENU 9
edit more presets repeat 4 - 7 repeat 4 - 7 8
save preset if desired ↵
(ENTER) SEL or ENTER 7
edit preset if desired
(full preset edit must be enabled -
see USER PREFERENCE SETUP) U (SOURCE)
P P (MODE)
source then AUDIO
MODE
VOL
∧
or VOL
∨
CENTER
­
or CENTER
†
REAR
­
or REAR
†
SUB
­
or SUB
†
DELAY
­
or DELAY
†
6
rename preset if desired ∧
(UP) or
∨
(DOWN)
VOLUME KNOB
­
(PAUSE) or
V
(STOP)
ˆ
(REW) or
‡
(FF)
5
recall preset
a
(PRESET) step to desired preset number or A + number 4
activate EDIT PRESET (TITLE) ↵
(ENTER) SEL or ENTER 3
move to Edit Preset (Titles) ∧
(UP) or
∨
(DOWN) ­ (PAUSE) or V (STOP) 2
activate menu system MENU MENU 1
Action From Front Panel From Remote
Note: If you have selected TUNER you can change channel or frequency as described in TUNER OPERATION.
GETTING RECEIVER STATUS
If you are not in a menu, pressing ENTER will bring up a two-line status message. This display will also pop up
automatically whenever you change sources or whenever the source information changes. The video type is very
important if you are using mixed composite and S-video sources since it will tell you how you must set your
monitor for the best picture. The bitstream and channel information is particularly important with DVDs since they
may contain multiple soundtracks. When you initially start the DVD you may get a Dolby Digital 2.0 soundtrack. To
get the best possible sound, you may have to use the DVD player’s menu system to get to a Dolby Digital or DTS
5.1 channel soundtrack. If you ever need to call B&K regarding a problem with your receiver be sure to note the
status display before calling.
'9' 352 /2*,&
DVD Source Composite Video
DVD PCM 2.0 Pro Logic
The audio/video source
y o u h a v e c h o s e n
T h e s u r r o u n d m o d e
y o u h a v e c h o s e n
The bitstream source
your receiver has detected
The bitstream type
your receiver has detected
The video type
your receiver has detected
T h e n u m b e r o f c h a n n e l s
your receiver has detected
recall receiver status
↵
(ENTER)
SEL or ENTER
Action From Front Panel From Remote
39 p/n 12699 Rev. 9812C