Philips Mando a distancia universal User Manual
Page 10
4. Restoring the original functions of your
remote control
1
Keep keys DISC MENU and BACK on
the SRU160 pressed simultaneously for
three seconds, until the LED flashes twice
and then remains lit.
2
Press the TV (or DVD) key.
All original functions have now been
restored and any extra functions have been
deleted.
5. Troubleshooting
•
Problem
–
Solution
•
The LED blinks four times after every key press.
–
The remote control is indicating that its battery is running low. Replace the old
battery with a CR2025 Lithium battery.
•
The device you want to operate does not respond and the LED does
not flash when you press a key.
–
Replace the old battery with a CR2025 Lithium battery.
•
The device you want to operate does not respond but the LED does
flash when a key is pressed.
–
Point the SRU160 at the device and make sure that there are no
obstructions between the SRU160 and the device.
•
The SRU160 does not respond properly to commands.
–
Maybe you are using the wrong code. Try programming the SRU160 again
using another code, which is mentioned under the brand of your device, or
reset for automatic search to find the right code. If the device still does not
respond, call our helpline.
10
ENGLISH
SRU160_A6_v2.qxd 25-05-2005 16:19 Pagina 10