Mic series – how to commission – Bosch MIC412 User Manual
Page 15
MIC series cameras come complete with the powerful
CAMSET configuration software to enable complete
set-up of the camera head.
To access the camera you will need the following:
1. Software disk (shipped with every camera and also
available as a download)
2. PC or laptop computer
3. A USB to RS485, RS232 to RS485 or USB to RS232
coupled with an RS232 to RS485 converter
to connect the PC or laptop computer to the
MIC series PSU. We recommend MIC-USB485CVTR.
Communicating with the camera head for initial
set-up
Using CAMSET software users will need to:
1. Set the individual camera address (1-254)
2. Set the Baud rate to match the controller used
3. Optionally set up other options such as inverse
image and/or invert controls (for inverted mount
installations) plus advanced functionality.
Please note: once the camera address and Baud rate are
set popular functions such as presets set-up and preset
tour set-up can be carried out by using the controller.
MIC series cable
Link from PC or laptop
to MIC series PSU via
an RS485 serial dongle
MC1 series PSU
MIC series
camera
PC or laptop running
CAMSET software
Telemetry from controller
Video out
MIC series product guide | 15
Local power
supply
MIC series – How to commission