beautypg.com

Adjusting the image, Picture freeze / no show function, Cursor function – BOXLIGHT CP-15t User Manual

Page 23

background image

23

BASIC OPERATION

ADJUSTING THE IMAGE

ZOOM Adjustment

1

Press ZOOM button on the Top Control or the Remote Control to
turn into the ZOOM mode.

2

Adjust the size of the image by pressing POINT UP/DOWN
button.
Press UP button to make the image larger, and press DOWN
button to make the image smaller.

ZOOM

The message disappears after 4 seconds.

FOCUS Adjustment

1

Press FOCUS button on the Top Control or the Remote Control to
turn into the FOCUS mode.

2

Adjust the focus of the image by pressing POINT UP or DOWN
button.

FOCUS

The message disappears after 4 seconds.

PICTURE FREEZE / NO SHOW FUNCTION

Press the FREEZE / NO SHOW button on the Remote Control Unit to
freeze the picture or turn the picture into a black image. This function is
cancelled when the FREEZE / NO SHOW button is pressed again or
any other function button is pressed.

NORMAL mode

FREEZE mode

NO SHOW mode

CURSOR FUNCTION

This projector can display a cursor by pressing cursor button on the
Remote Control. The cursor can be controlled with the POINT buttons.
To terminate the Cursor Function, press CURSOR button again.

NOTE : The cursor settings set with the “Media Card Imager” is not

available in this projector.

Cursor