BlueAnt Interphone - Manual (Page 10)

9
Special Features
High Volume or Low Volume Mode
Setting to high or low volume mode depends on user’s helmet design or
structure. Some helmet types may require near or far positioning of the
InterPhones Ear Speaker(7) from the user’s ear. Please try both modes to
discover which mode is appropriate for your helmet.
High Volume Mode Activation is advised if you position the Ear Speaker(7)
far from your ear. This will enable you to still have a clear and audible audio.
Procedure:
1. From Off, press and hold the Volume Up(3).
2. Keep the Volume Up(3) pressed and then press the MFB(1) for 5
seconds.
3. Power On beep followed by a HIGH TONE can be heard. The Status
Indicator(2) will flash red-blue.
4. Release both buttons.
Note: Be careful. At full volume, the Ear Speaker(7) can be very loud. Do
not position your Ear Speaker close to your ear.
Low Volume Mode Activation is advised if the positioning of your Ear
Speaker(7) is very near to your ear.
Procedure:
1. From Off, press and hold the Volume Down(4).
2. Keep the Volume Down(4) pressed and then press the MFB(1) for 5
seconds.
3. Power On beep followed by a LOW TONE can be heard. The Status
Indicator(2) will flash red-blue.
4. Release both buttons.