Specifications, Highlights – Philips Pronto Extensor inalámbrico User Manual
Page 2
Issue date 2014-02-05
Version: 3.2.13
12 NC: 9082 100 07354
EAN: 87 10895 94957 6
© 2014 Koninklijke Philips N.V.
All Rights reserved.
Specifications are subject to change without notice.
Trademarks are the property of Koninklijke Philips N.V.
or their respective owners.
Specifications
RFX9400/00
Wireless Extender
Highlights
Adressable IR ports
Addressable IR ports enable control of the same
type of devices in a rack independently (by the same
extender). Typically this is the case with multiple set-
top boxes to distribute content throughout the
house. Every device is asigned its own dedicated IR
port. As a result the device will only receive the IR
codes that are intended for this device and not for
any other. Without addressable IR codes, every
device will always receive all sent-out IR codes.
Wired and/or wireless control
Depending on the situation the extender can be used
wired via ethernet for maximum reliability or
wirelessly using WiFi for a flexible installation.
Pronto protocol
The Pronto system uses standard WiFi for wireless
control but has added an additional smart protocol
to guarantee a reliable and timely execution of IR
codes and macros.
Smart feedback
The smart 2-way Pronto protocol regulates the
commands that are sent from the Pronto control
panel to the extenders. Each extender will
acknowledge the execution and the user will be
informed in case a command cannot be executed.
IR code range
The powerful IR-circuit is capable of transmitting
virtually any IR code. Where many remote control
systems are limited to 125 kHz, the Pronto
extenders can send IR-frequencies to up to 1 MHz.
Out-of-the-box use
The extender works out of the box in stand alone
mode and requires no special settings. When
encryption or fixed IP is desired, the internal web
browser is available via a PC or laptop.
Feedback indicators
Colored LED's provide information about the
system, such as ethernet or WiFi connections, busy
status or execution of an IR, RS232 or relays
command (RFX9600 only). Errors are also displayed,
helping the user to do troubleshooting if necessary.
Connectivity
• Built-in wireless technology: 802.11g
• IR emitter connectors: 4
• Encryption / security: WEP 128 bit, WEP 64 bit
• Network mode: DHCP, Fixed IP
• Ethernet
Convenience
• Error indication: LED
Accessories
• AC/DC Adaptor: 5V DC 2A
• Printed User Guide: English, French, Spanish,
German, Russian, Dutch
• Dual IR emitter wires: 2
• Mini-jack IR cable: 2
Dimensions
• Master carton quantity: 2
• Master carton weight: 2.370 kg
• Product dimensions (WxDxH): 157 x 100 x 33 mm
• Product weight: 0.169 kg
• Temperature range (operation): 32°F to 122°F
Customization
• Configuration via webserver
System Specifications
• CPU: Freescale 32 bit RISC
• CPU speed: 266 MHz
Infrared Capabilities
• Addressable IR output: Adjustable IR output level
RF Capabilities
• Adresses (ID's): 16
• Frequency (GHz): 2.4
• WiFi based
Outer Carton
• Gross weight: 1.738 kg
• GTIN: 1 87 10895 94957 3
• Outer carton (L x W x H): 35.5 x 18.4 x 23 cm
• Nett weight: 1.084 kg
• Number of consumer packagings: 2
• Tare weight: 0.654 kg
Packaging dimensions
• Packaging dimensions (W x H x D):
34.8 x 20.6 x 8.5 cm
• EAN: 87 10895 94957 6
• Gross weight: 0.869 kg
• Nett weight: 0.542 kg
• Number of products included: 1
• Packaging type: Carton
• Tare weight: 0.327 kg
• Type of shelf placement: Laying
Product dimensions
• Product dimensions (W x H x D):
15.5 x 3.5 x 11 cm
• Weight: 0.17 kg
•