Blaupunkt SAN FRANCISCO RDM 169 - Manual (Page 41)

86
The system is switched off with “ON” when
the ignition is switched on.
The time will be displayed if you have ad-
justed the corresponding setting to “CLK on”.
The display will switch off when the ignition
is switched off.
b) the audio system can only be switched
off with “ON”, not with the ignition.
The system is switched off.
The time will be displayed if you have ad-
justed the corresponding setting to “CLK on”.
To prevent the battery from being
run down, this display will switch off
after 3 hours.
CDC (Changer)
Will not appear unless a CD changer has
been connected and the DSC menu is ac-
tivated in the changer mode.
This function is used to delete names and
the TPM.
CD – Deletes the name and TPM of the
selected CD
ALL – Deletes the names and TPM of all
the CDs
PREV – Selects the previous CD
NEXT – Selects the next CD.
For more information refer to “Deleting CD
names/TPM at the same time”.
To quit the DSC programming mode and
store the adjustment:
•
Press DSC.
Overview of the DSC default
settings
INSTALL menu
IGN on
AMP on
AUX off
TU(ner) menu
TA off
AF on
REG off
LOC off
RT off
PTY off
MONO off
DSC menu
Tuner
PTY (language) Deutsch
SHARX on
LO 1
DX 1
HICUT 2
Display
ANGLE 0
DIM Day 9
Night 7
FADE off
Various
TVOL 35
BEEP 3
DLAY 3
VOL 25
SCAN (Time) 10 sec.
HP-F off
KeyCard
LED on
TOM on
Clock
SET 0:00
SYNC AutoSync
MODE 24h
VIEW CLK off
AUD menu
DSA off
DNC off
LOUDNESS 4
SUBOUT 0
DSC programming
S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr 86