Blaupunkt SAN FRANCISCO RDM 169 - Manual (Page 10)

55
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
CD and CD changer operation
<< / >> Selects CDs (for CD changer
operation only)
>> Up: Press briefly
<< Down: Press briefly
/ Selects tracks
Up: Press briefly
CUE - fast forward (audible):
Hold pressed down
Down: Press briefly twice or
repeatedly in succession
Restart a track: Press briefly
Review - fast reverse (audi-
ble): Hold pressed down
8 DSC (Direct Software Control)
Use DSC to adjust those basic settings
which can be programmed. For more
information refer to “DSC program-
ming”.
9 AUD
Adjusts Treble, Bass, Fader (front/
rear), Balance (left/right), Loudness
(boosts lower frequency ranges at low
volume to create a more natural
sound) and SUB (-out) to adjust the
amplifier level for the SUB-woofer.
: DIS
Select from a number of displays
Radio operation
Press DIS repeatedly to select:
- the name of the station selected
- the current frequency
- PTY code
- clock
This will not operate properly unless
the radio is tuned into an RDS station
with adequate signal strength.
Press DIS for approx. 4 sec.:
to synchronise the clock (internal clock
with the DCF-77 atomic clock).
CD operationb
Press DIS to select:
- Track number, clock
- CD name (if entered), track number
- Clock, track number
CD changer operation
Press DIS to select:
- CD number, track number, clock
- CD name (if entered)
- Clock, track number
Quick Reference
Making adjustments:
Select the operating mode.
Press AUD once and select the func-
tion you wish to adjust with the corre-
sponding key. “Bass” and the current
setting, for example, will appear in the
top line of the display.
Use << / >> to alter the setting.
The last setting selected will be stored
automatically.
SUB-Out
If a SUB-woofers is connected to the
system, it is possible to adjust the out-
put level with “SUB” and / .
To quit the AUD menu:
Press AUD or EXIT.
S.FrancisRDM169 gb 95%® 29.05.2002, 10:56 Uhr 55