B&B Electronics 1140 - Manual (Page 7)

Documentation Number 11401198 Manual 5
B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350
PH (815) 433-5100 -- FAX (815) 433-5105
The Model 1140 has two sets of eight switches, yielding 16 total
DIP switches. The three sets will be referred to as S1 and S2. As
Figure 2 shows, the orientation of all DIP switches is the same with
respect to "ON" and "OFF" positions.
Figure 2. Close-up of DIP switches showing “ON” and “OFF” positions
3.2 CONFIGURATION SWITCH SET "S1"
The DIP switches on S1 set data rate, clock source,
async./sync. mode and carrier control method. The default settings
are summarized in the table below.
Figure 3. Summary of DIP switch default settings for set S1