Bissell STEAM 'N CLEAN II 1865 - Manual (Page 7)

All tools attach the same way. Align the two notches on the tool you
choose with the two tabs in the nozzle. Insert notches into tabs com-
pletely, then turn the tool a half rotation clockwise until it locks. Always
check to make certain the tool is fitted firmly before using.
2-Position Steam Applicator (A)
This tool has two positions. Use the compressed or “short”
position for concentrated steam and the extended or “long” position
for diffused steam.
Steam Concentrator (B)
Concentrates steam to clean small, hard to reach areas, or for
intense steam cleaning of stubborn soil.
Steam Brushes (C)
Attach to the end of the Steam Concentrator for scrubbing
stubborn soil. Color-coded for your specific use.
Triangle Steam Brush (D)
Attaches to steam concentrator.
Stubborn soil that resists traditional hot water, cleaning solutions
and vigorous scrubbing can often be effectively removed with high
temperature steam. Baked-on-grease on the stovetop, dried fruit
juice in the refrigerator, mildew or stubborn soap scum on sliding
shower doors, gum on countertops — steam makes all these far
easier to clean. Use your Steam ‘n Clean II to soften and remove
stubborn dirt, grime, dry, hardened food, and other household soil
from hard surfaces. You can also use your steam cleaner to clean
pet cages.*
*Note: Always remove pets before cleaning.
Fill the Water Tank with cool tap water or
distilled/demineralized water.
Connect the C.I.D. plug to an appropriate outlet.
Attach tool. For large surface steam cleaning such as
countertops, basins and sinks, use the 2 Position Steam
Applicator. For smaller areas, use the Steam Concentrator
with/without the Steam Brush.
When green indicator light glows, slide Safety Lock back and
press Steam Switch to release steam. Steam continues to
come out of the tool while switch is pressed.
Wipe surface with a clean, dry cloth.
7
1.
2.
3.
4.
5.
C A U T I O N :
Before disconnecting a tool
from the steam cleaner,
make certain that steam is
no longer coming from the
nozzle. Use an oven mitt to
remove tools, or wait until
they cool before removing.
C A U T I O N :
Keep face and all exposed
skin away from steam.
Failure to do so may result in
personal injury.
Steam Cleaning Hard Surfaces
C A U T I O N :
Thermal shock can shatter
glass. Before cleaning cold
glass surface,
carefully
warm the surface by
directing the steam jet on
the glass from a distance of
no less than 4 - 6”.
All Living Areas
Tools and Accessories
A B
C D