Selecting tracks, Fast track selection, Fast searching (audible) – Blaupunkt 7 647 482 310 User Manual
Page 17: Random track play (mix), Scanning tracks (scan), Repeating tracks (repeat)
![background image](/manuals/50465/17/background.png)
40
Notes:
The CD symbol indicates that a CD is
located in the drive.
A border surrounding the CD symbol
indicates that CD is selected as au-
dio source.
If the vehicle ignition was switched
off prior to inserting the CD, you
must switch in on fi rst with the but-
ton
2 to start the playback.
If a CD is already inserted in the drive,
press the
SRC/ button
> repeated-
ly until "CD" appears on the display.
Playback begins from the point at which it
was last interrupted.
Selecting tracks
Press one of the arrow buttons
6 to
select the next or previous track.
If you press the or button
6 once, the
player will play the current track again from
the beginning.
Fast track selection
To quickly select tracks backwards or for-
wards,
press and hold down one of the
buttons
6 until fast-reverse / fast-for-
ward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
press and hold down one of the
buttons
6 until fast searching back-
wards / forwards begins.
•
•
u
u
u
u
Random track play (MIX)
Press the
5 MIX button
<.
"MIX CD" appears briefl y on the display
and the MIX symbol lights up. The next ran-
domly selected track will then be played.
Cancelling MIX
Press the
5 MIX button
< again.
"MIX OFF" appears briefl y on the display
and the MIX symbol disappears.
Scanning tracks (SCAN)
You can scan (briefl y play) all the tracks on
the CD.
Press and hold down the
MENU button
: for longer than two seconds.
The next track will then be scanned.
Note:
You can set the scanning time. For
further information, please read the
section entitled "Setting the scanning
time" in the "Radio mode" chapter.
Cancelling SCAN and continuing
listening to a track
To stop scanning, press the
MENU but-
ton
:.
The currently scanned track will then con-
tinue to be played normally.
Repeating tracks (REPEAT)
If you want to repeat a track,
press the
4 RPT button
<.
"RPT TRCK" appears briefl y on the display
and the RPT symbol is displayed. The track
is repeated continuously until you deacti-
vate RPT.
u
u
u
u
u
CD mode
02MadeiraPortoCD27_gb.indd 40
02MadeiraPortoCD27_gb.indd 40
26.10.2006 16:08:40 Uhr
26.10.2006 16:08:40 Uhr