Philips SENSEO® Viva Café Cafetera de monodosis de café User Manual

Page 10

Press the on/off button 3.

The light ring around the on/off button lights up to indicate that you have

to flush the machine.

To start flushing, press the 1-cup button q and the 2-cup button

briefly at the same time.

Never interrupt the flushing cycle halfway. If you do, the boiler does not

fill itself properly.

, The light ring around the on/off button starts flashing to indicate that

the flushing cycle has started. The flushing cycle takes approx. 1.5 to

2.5 minutes.

, During the flushing cycle, the boiler fills itself with water from the

water reservoir and cold water comes out of the coffee spout.

During the flushing cycle, the machine produces more noise than

during a regular brewing cycle.

, When all the water in the water reservoir has been used up, the

flushing cycle is finished and the machine switches off.

now your philips sEnsEo

coffee machine is ready for use.

Note: If the machine does not work, repeat steps 1-8. Do not interrupt the

flushing cycle.

Brewing SENSEO

coffee

tips for the best sEnsEo

quality

- Use fresh water every time.

- Use the SENSEO

coffee pods that have been specially developed by

Marcilla for your SENSEO

coffee machine for a full, round taste.The

Marcilla SENSEO

coffee pods stay fresh longer if you store them in an

airtight storage container.

- To make sure that the coffee always tastes optimally, rinse the pod

holders, the coffee collector and the coffee spout regularly.

- The SENSEO

coffee tastes best if you stir it before you drink it.

EnglisH