System setup, Installing the remote control batteries – Bose 3.2.1 GS Series II User Manual
Page 23
23
System Setup
Engl
is
h
Installing the remote control batteries
1.
On the back of the remote, slide open the battery compartment (Figure 19).
2.
Insert the two supplied AA (IEC-R6) 1.5V batteries, or their equivalent, as shown. Match
the plus (+) and minus (–) marked on the batteries with the plus (+) and minus (–) inside
the battery compartment.
3.
Slide the battery compartment cover back into place.
Note: Replace the batteries when the remote control stops operating or its range seems reduced.
Figure 19
Installing the batteries
Battery
compartment
door
(2) AA batteries (IEC R6)
+
+
This manual is related to the following products: