Brinkmann 7231 Series - Manual (Page 26)

Grill Body
Assembly
25
Step 9
Attach tank heat shield to
heat shield plate using one
#8 self-tapping screw (black).
Note: When performing Step 10,
Lift grill body from front and
rear panels to avoid injury to
hands and fingers.
Step 10
With the help of a friend, place grill
body assembly on grill cart. Grill
body will rest between upper side
sections of cart. Align bolt holes
located on the inside of the grill
body assembly. Secure using four
M6 X 12mm bolts (black) with star
washers (black).