Brinkmann 7231 Series - Manual (Page 25)

Step 5
Install the wheels as illustrated, by
inserting the wheel axle bolts
through the wheels, washers and
right side cart leg axle holes. Tighten
axle bolts securely using hex nut
wrench provided in parts pack.
Step 6
Snap wheel hubcaps onto the
outside of wheels as illustrated.
Note: With the help of a friend, turn
the cart to its upright position.
Try to minimize the stress to
the legs.
Step 7
Attach the rear support with heat
shield plate to the rear legs of the
cart frame assembly using two
M6 X 12mm bolts (black) and star
washers (black).
Step 8
Attach heat sheild plate to front
panel using three #8 self-tapping
screws.
24
Leg
Wheel
Washer
Wheel axle
bolt
Hubcap