Blaupunkt CD32 - Manual (Page 15)

15
FRANÇAIS
ENGLISH
ESP
AÑOL
PORTUGUÊS
Stopping SCAN
To stop scanning,
➮
briefly press the 2 (SCAN) button
9
again.
The currently scanned track will then
continue to be played normally.
Note:
●
You can set the scanning time
(scantime). For further details, read
the section entitled “Setting the
scantime” in the “CD mode”
chapter.
Pausing playback (PAUSE)
➮
Press button 1 ( )
9
.
“S--PAUSE” appears in the display.
Canceling pause
➮
Press button 2 ( )
9
while in
pause mode.
Playback is resumed.
CLOCK - Time
Displaying the time
To display the time,
➮
briefly press the button
;
.
Setting the clock
➮
Press the MENU button
5
.
➮
Keep pressing the or button
5
until “CLOCKSET” appears in
the display.
➮
Press the button
5
.
The time appears in the display. The
minutes flash on and off and can be
adjusted.
➮
Adjust the minutes using the /
buttons
5
.
Once the minutes are set,
➮
press the button
5
.
The hours flash on and off.
➮
Adjust the hours using the /
buttons
5
.
When you have finished making your
changes,
➮
press the MENU button
5
twice.
Selecting 12/24-hour clock
mode
➮
Press the MENU button
5
.
➮
Keep pressing the or button
5
until “24 H MODE” or “12 H
MODE” appears in the display.
➮
Press the or button
5
to
switch between the modes.
CD CHANGER MODE CLOCK - TIME