Blaupunkt CD32 - Manual (Page 12)

12
Setting the scantime
You can set the scanning time to be-
tween 5 and 30 seconds in the menu.
➮
Press the MENU button
5
.
➮
Keep pressing the or button
5
until “SCANTIME” appears in
the display.
➮
Set the required scantime using
the and buttons
5
.
When you have finished making your
changes,
➮
press the MENU button
5
twice.
Note:
●
The set scantime also applies to
scanning in CD changer mode.
Stopping SCAN and continuing
playback
To stop scanning,
➮
press button 2 (SCAN)
9
again.
The current track will then continue to
be played.
Repeating tracks (REPEAT)
If you want to repeat a track,
➮
press button 3 (RPT)
9
.
“S--RPT” and the track number appears
in the display. The track is repeated until
you deactivate RPT.
Deactivating REPEAT
If you want to deactivate the repeat func-
tion,
➮
press button 3 (RPT)
9
again.
The standard CD display appears. Nor-
mal playback is then resumed.
Selecting tracks
➮
Press one of the / or /
buttons
5
to select the next or
previous track.
If you press the / button
5
once,
the current track will be played again
from the beginning.
Fast track selection
To quickly select tracks backwards or
forwards,
➮
keep one of the / buttons
5
pressed until fast-reverse / fast-
forward track selection begins.
Fast searching (audible)
To fast search backwards or forwards,
➮
keep one of the buttons
5
pressed until fast searching
backwards / forwards begins.
Random track play (MIX)
➮
Press button 4 (MIX)
9
.
“S--MIX” and the track number appears
in the display. The next randomly se-
lected track will then be played.
Canceling MIX
➮
Press button 4 (MIX)
9
again.
The standard CD display appears.
Scanning tracks (SCAN)
You can play briefly all the tracks on the
CD.
➮
Press button 2 (SCAN)
9
.
CD MODE