Philips Elegante microcadena - Manual (Page 21)

8
Press TIMER to confi rm.
The timer is set and activated.
»
Activate and deactivate the alarm
timer
1
Press TIMER repeatedly to activate or
deactivate the timer.
If the timer is activated, the display
»
shows .
If the timer is deactivated,
»
disappears on the display.
Note
If disc/USB device source is selected and the track •
cannot be played, tuner is activated automatically.
Listen through headphone
1
Plug a headphone into the socket on
the unit.
10 Use more of
your Micro
System
Set the sleep timer
This unit can switch to standby automatically
after a preset period of time.
1
When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated, the
»
display shows .
To deactivate sleep timer
1
Press SLEEP repeatedly until “SLP OFF” is
displayed.
When sleep timer is deactivated,
»
disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock. The
DISC, TUNER or USB is activated to play at a
preset time.
1
Ensure that you have set the clock
correctly.
2
In standby mode, press and hold TIMER
for more than 2 seconds.
3
Press CD, TUNER, USB, iPhone/iPod to
select a source.
4
Press TIMER to confi rm.
The hour digits are displayed and begin
»
to blink.
5
Press VOL +/- to set the hour.
6
Press TIMER to confi rm.
The minute digits are displayed and
»
begin to blink.
7
Press VOL +/- to set the minute.