beautypg.com

Air cleaners and humidifiers, Ventilation, Zoning – Bryant CENTRAL AIR CONDITIONER with PURON REFRIGERANT User Manual

Page 3: Check condensate drain, When not to use your unit

background image

3

liking. Continuous fan operation mini-
mizes any temperature differences.

Air Cleaners and Humidifiers

Systems equipped with electronic or
mechanical air cleaners and/or humidifi-
ers offer the added benefits of having the
air continuously cleaned year-round, and
humidified during the winter season.

Ventilation

A system equipped with a heat or
energy recovery ventilator offers the

advantage of exhausting stale air from
the home and allowing fresh air in from
the outdoors while minimizing heat loss.

Zoning

Your system may also be equipped
with a zoning system which allows
individual control over the temperatures
of separate areas of your home.

Check Condensate Drain

Your air conditioner will remove
humidity from your home during

the cooling season. After a few
minutes of operation, you should be
able to see water trickle from the
condensate drain of the cooling coil.
Check this occasionally to be sure
the drain system is not clogged. Of
course, don’t expect to see much
drainage if you live in a very dry
environment.

When Not To Use Your Unit

Your unit is not designed to be operated
when outdoor temperatures are lower

Fig. 2—Bryant Non-Programmable Thermostat

Fig. 3—Bryant Programmable Thermostat

MODE

FAN

RESET/FILTER

RESET FILTER BUTTON

RESTARTS THE TIMER

THAT CALCULATES

THE NEXT AIR FILTER

CHANGE OR CLEANING

FAN BUTTON CHOOSES
BETWEEN ON OR AUTO
FAN OPERATION

LCD READOUT DISPLAYS

CURRENT ROOM TEMPERATURE,

DESIRED ROOM TEMPERATURE,

UNIT MODE SETTING,

AND FAN MODE SETTING

MODE BUTTON SELECTS
BETWEEN OFF, HEAT,
COOL, AND AUTO OPERATION

UP AND DOWN
BUTTONS INCREASE
OR DECREASE THE
DESIRED TEMPERATURE
SETTINGS

Thermostat

RESET FILTER BUTTON

RESTARTS THE TIMER

THAT CALCULATES

THE NEXT AIR FILTER

CHANGE OR CLEANING

HOLD BUTTON MAINTAINS
THE CURRENT TEMPERATURE
AND OVERRIDES PROGRAMMED
TEMPERATURE CHANGES
UNTIL RESET

SET TIME

BUTTON

FAN BUTTON CHOOSES
BETWEEN ON OR AUTO
FAN OPERATION

LCD READOUT DISPLAYS
CURRENT ROOM TEMPERATURE,
DESIRED ROOM TEMPERATURE
OR OUTDOOR TEMPERATURE,
UNIT MODE SETTING,
FAN MODE SETTING,
AND TIME OF DAY

MODE BUTTON SELECTS

BETWEEN OFF, HEAT, COOL,

AND AUTO OPERATION

PROGRAM BUTTONS

FOR PROGRAMMING

HEATING/COOLING

CYCLES

UP AND DOWN
BUTTONS INCREASE
OR DECREASE THE
DESIRED TEMPERATURE
SETTINGS

Programmable
Thermostat

HOLD

RESET FILTER

SET TIME/TEMP

FAN

END

CHANGE DAY

MODE

PROGRAM

COPY PREVIOUS DAY