beautypg.com

Turbo function, Absorbing cut hairs, Trimming with comb attachment – Philips BEARDTRIMMER Series 7000 barbero con sistema de aspiración turbo User Manual

Page 9

background image

2

If the battery is completely empty, wait a few minutes before you

switch on the appliance.
Turbo function

You can use the turbo function for greater suction power and increased

cutting speed.

1

Switch on the appliance (Fig. 3).

2

Press the turbo button (Fig. 4).

When you switch off the appliance, the turbo function is deactivated

automatically.

absorbing cut hairs

The suction mechanism is activated automatically as soon as you switch

on the appliance. It absorbs cut hairs during every kind of use, i.e.

trimming with and without comb attachment and contouring. The flexible

hair guide follows the contours of the face and directs cut hairs towards

the nozzle of the vacuum mechanism.

We advise you to empty the hair-collection chamber after each trimming

session. When trimming long, dense beards, it may also be necessary to

empty the hair-collection chamber during the trimming session in order

to maintain optimal suction performance (see chapter ‘Cleaning’, section

‘Hair-collection chamber’).
Note: To ensure optimal functioning of the vacuum system, do not cut off

more than approx. 7mm of your overall beard length at a time. If you want to

cut your beard shorter, repeat the process one or more times.

Trimming with comb attachment

1

Turn the adjustment ring (Precision Zoom Lock `) to the desired

hair length setting (see table). (Fig. 5)

, The setting appears in the window below the adjustment ring

(Precision Zoom Lock `).

English

9

This manual is related to the following products: