Charging, Charge indications, Preparing for use – Philips BEARDTRIMMER Series 7000 barbero con sistema de aspiración turbo User Manual
Page 8: Using the appliance, Corded trimming

charging
Charge the appliance fully before you use it for the first time and after a
long period of disuse.
Charging takes about 70 minutes if the appliance is completely empty.
1
Switch off the appliance.
2
Insert the appliance plug into the appliance and put the adapter in
the wall socket.
, The charging light goes on to indicate that the appliance is
charging. (Fig. 2)
charge indications
- The green charging light lights up continuously during charging.
- The green charging light starts flashing when the battery is fully
charged.
- If the red battery-low light flashes when you switch off the appliance
after cordless use, the battery is low and needs to be charged.
- If the red battery-low light flashes and the motor does not start
running when you press the on/off button, the battery is empty and
needs to be charged.
preparing for use
Always comb your beard or moustache with a fine comb before you
start trimming.
using the appliance
corded trimming
Do not run the appliance from the mains when the battery is fully
charged.
Note: If the battery is low, you can also use the appliance from the mains:
1
Switch off the trimmer, connect it to the mains and wait a few
seconds before you switch it on.
English
8