Bosch HBN35 - Manual (Page 8)

English 6
30” Appliances
Dimensions for 30” Wall-Mounted Units
28 1/2"
(724mm)
28 1/4"
(718mm)
27 "
(686mm)
27 13/16"
(706mm)
min. 4 3/4" (121mm)
max. 31 3/8" (797mm)
24 "
(610mm)
23 7/8" (606mm)
22 " (559mm)
29 1/16"
(738mm)
29 3/4"
(755mm)
Single Oven 30”
It is good practice, when oven is installed
at the end of a cabinet run, adjacent to a
perpendicular wall or cabinet door, to
allow at least 1/4” space between the
side of the oven and the wall/door.
For oven support, install 2x4’s extending
front to back flush with the bottom and
the side of the opening. The supporting
base must be well secured to the floor/
cabinet and level.
Note: The conduit box must be installed
either above or below the unit. If the
conduit box is installed below the unit, a
2” diameter hole or space is required
between the back wall and the right rear
of the 2x4 supports.
The cabinet base must be flat and
capable of supporting a weight of at
least 190 lbs (86 kg).
28 1/2"
(724mm)
24 "
(610mm)
51 1/8"
(1299mm)
9 3/4"
(248mm)
51 3/4"
(1314mm)
29 3/4"
(755mm)
23 7/8" (606mm)
22 " (559mm)
49 3/4"
(1264mm)
27 13/16"
(706mm)
Double Oven 30”
It is good practice, when oven is
installed at the end of a cabinet run,
adjacent to a perpendicular wall or
cabinet door, to allow at least 1/4”
space between the side of the oven
and the wall/door.
For oven support, install 2x4’s
extending front to back flush with the
bottom and the side of the opening.
The supporting base must be well
secured to the floor/cabinet and level.
Note: The conduit box must be located
above the unit to facilitate connecting
and servicing.
The cabinet base must be flat and
capable of supporting a weight of at
least 330 lbs (150 kg).