BT Synergy 3500 - Manual (Page 53)

50
Synergy 3500 user guide ~ 3rd Edition ~ 21st October ’02 ~ 4461
You can turn your Synergy 3500
answering machine on and off and
listen to your messages from any
Touchtone
TM telephone. To protect your
privacy, messages can only be accessed
by entering a 3-digit security code.
The pre-set code is 000 and can be
changed. If you change the code it is
advisable that you make a note of it
somewhere safe.
Note
After 15 seconds the handset will
automatically return to standby.
Remote access
To change your security PIN code
Press the
ߜ button twice.
Press the 9 button.
To set a new security PIN
code press
✱
.
You will hear a beep, followed
by, “Please enter new security
code after the tone”
.
Enter a 3-digit code of your
choice.
The prompt will announce the
new security PIN code.
To confirm your security code
press
# .
Press and hold the
✘
button to
return to standby.
To switch your answering
machine on remotely
If you go out and forget to turn
your answering machine on
you can switch it on remotely.
Dial your telephone number.
Let the phone ring for 20 rings
until you hear your outgoing
message.
Press the
✱
button.
Enter your security code.
Press the 7 button within 8
seconds. You will hear “Answer
On”
and your answering
machine will now be switched
on to answer incoming calls.
Note
If you have new messages they will
be played after you have entered your
security code.
enu M
crec e y S
9
WX
YZ
fn
o C
7
PQR
S
REMO
TE
A
C
CESS