beautypg.com

Troubleshooting technical specifications – Philips Saeco Lavazza A Modo Mio Extra en rojo User Manual

Page 17

background image

EN

TROUBLESHOOTING

TECHNICAL SPECIFICATIONS

Problems

Causes

Solutions

The machine does not turn on.

EXTRA

: power light is off after having

turned the machine ON and waited for a few

minutes.

PREMIUM

: the brew lights and are not

blinking.

» The machine is not connected to the

p

ower source.

»

Connect the machine to the power source.

»

Contact Saeco customer service.

The machine requires a lot of time to heat up.

»

The machine has limescale build-up.

»

Descale the machine.

The pump is very noisy.

»

No water in the tank.

»

Circuit is not primed.

»

The tank with fresh drinking water.

»

Prime the water circuit.

The loading lever doesn’t reach the brewing

position.

»

Dregdrawer full.

»

Pod inserted incorrectly.

»

Empty out the dregdrawer.

»

Repeat the sequence, lever in the off position,

lever in the brewing position; if that is not enough

remove the pod manually from the compartment

after unplugging the machine.

The coffee is cold.

»

EXTRA

: t

he brew light

w

as off when

the brew button was pressed.

»

Wait until the indicator light turns on.

The coffee is brewed too fast, the brewed

coffee is not creamy.

»

Pod already used.

»

Place the lever back in the off position and insert

a new pod.

The coffee is not brewed and some steam comes out

from the pod compartment.

»

The loading lever was not set to the

brewing position.

»

Set the loading lever to the brewing position.

Coffee is not brewed or brewed in drips only.

»

Dispensing spout is clogged.

»

Circuit is not primed.

»

Clean the dispensing spout.

»

Prime the water circuit.

The pods, after they have been used, have

holes only on the upper film.

»

Circuit is not primed.

»

Prime the water circuit.

Hot water/steam not dispensed.

»

Hot water/steam wand is clogged.

»

Clean the wand with a needle (the machine needs

to be unplugged and the steam/hot water knob

needs to be closed).

The milk does not froth.

»

Not suitable milk.

»

The milk is too hot.

»

EXTRA

: the steam light was off when

the steam was dispensed.

»

Use fresh, partially skimmed milk.

»

Use milk at refrigerator temperature.

»

EXTRA

: press the witch and wait until the

indicator light turns on.

· Nominal Voltage - Power Rating - Power Supply:

S

ee label on

the appliance

· Dimensions:

H

eight

Width

Depth

12” (305 mm)

9

.25” (235 mm)

1

3” (330 mm)

· Weight: about

1

1 lbs. (5 kg)

· Water tank:

3

4 oz. (1 lt.) - Removable type

·

H

ousing Material: ABS - Thermoplastic

· Power Cord Length:

4

7” (1.2 m)

· Control Panel:

T

op of machine

· Boiler: Stainless steel

· Safety Devices: Boiler pressure safety valve

· Thermal fuse (EXTRA and PREMIUM versions)

· Safety thermostat (PREMIUM version)

Please contact a Saeco authorized service center for any faults not covered in the above table or when the suggested solutions

do not solve the problem.

2006/42 CE - 2004/108 CE - 2006/95 CE