Brinkmann ProSeries 8445 User Manual

Page 29

Step 12

Attach side burner to right side of
cart frame assembly. Insert two
M6 X 12mm bolts (black) into both
right legs halfway. Place side
burner over bolts and slide toward
back of grill, then tighten securely.
Fasten side burner front panel to
grill body with one M6 X 12mm bolt
(black).

Step 13

Attach hose heat shield using two
#8 self-tapping screws.

Step 14

Loosen the two M4 bolts with
washers from the bottom of the
burner assembly bracket. This
will allow the burner to move
freely while performing Step 15.

Step 15

Remove two M4 bolts and
washers from the side burner
valve. Insert the side burner
valve assembly through the hole
in the side burner front panel,
seat the valve nozzle into the
burner venturi. Hold in place
while you perform Step 16.

Warning: Never use your grill

without leak testing all
gas connections and
hoses. See the section
on "Leak Testing" in this
manual for proper
procedures.

Side Burner
Valve

Burner Venturi

Valve Nozzle

Hose Heat

Shield

Burner Venturi

Assembly

Bracket