Bissell BIGGREEN 40M1 - Manual (Page 8)

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
O
perations
8
Carpet cleaning continued
7. Cleaning strokes. Release the trigger
and make one slow forward and back-
ward pass over the same area to remove
any residual dirty water and aid in drying.
Repeat cleaning passes until solution being
pulled up appears clean. continue passes
without pressing the trigger until you can’t
see any more water being pulled up.
8. Remove the dirty water tank by pulling the
handle to the upright position and lift up.
carry the tank like a bucket to a utility sink
or outside where you will dispose of the
dirty water.
9. unlatch the top of the tank from the bottom
by pushing the handle all the way forward
and lifting the top off. pour dirty water into
the sink.
Note: You may notice hair and debris
deposits on the carpet or in the tank
that were loosened by the cleaning
action (especially with newer carpets
that have never been deep cleaned
before). This debris should be picked
up and thrown away.
10. fill the clean water tank with clean hot tap
water and follow instructions 2 - 7 to
continue cleaning.
9.
8.
9.
CAUTION:
Do not overwet. Take care not to
run over loose objects or edges
of area rugs. Stalling brush may
result in premature belt failure.