Bissell BIGGREEN 40M1 - Manual (Page 16)

w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
T
roubleshooting
w w w. b i s s e l l . c o m 8 0 0 . 2 3 7 . 7 6 9 1
16
Reduce Spray or No Spray
Possible causes Remedies
1. Water tank may be empty 1. Fill clean tank with hot tap water
2. Tank may not be seated completely 2. Turn power OFF ( 0). Remove and reseat tank.
3. Pump may have lost prime. 3. Turn power OFF ( 0) and then back ON (I). Wait one minute,
then depress trigger
4. Debris filter on base is clogged 4. Use hand to remove debris
DirtLifter
®
PowerBrush does not turn
Possible causes Remedies
1. The belt is off or broken 1. Turn power OFF ( 0) and unplug unit from outlet. Follow
instructions on page 14
2. The unit is in the upright position 2. Brushes only rotate when unit is reclined using the
recline handle
3. Circuit breaker on machine may have tripped 3. Turn the machine OFF ( 0) and unplug from outlet. Check
to see if foreign object is caught in brush roll. Remove
object. Plug machine in to reset circuit breaker
Cleaner not picking up solution
Possible causes Remedies
1. Tanks may not be seated properly 1. Pick up both the clean and dirty water tanks and reseat
them so they fit snuggly on the unit
2. Clean water tank is empty 2. Check fluid levels in clean water tank and refill if necessary
3. Dirty water tank has picked up the maximum amount 3. Empty dirty water tank. Refill clean water tank with water
of dirty water and the red float door has closed and formula. Place both tanks back onto unit
4. Red float “door” in the tank may have closed as a result of 4. Turn the machine OFF ( 0), allowing red float door to release
bumping an object or moving machine back and forth too quickly into the open position,. Turn the unit back ON ( I) to
continue cleaning. Be sure your forward and backward
strokes are completed at a slower pace
5. Front nozzle of machine is clogged 5. Use fingers to remove any debris from this area
6. Upper body filter is clogged 6. Use fingers to remove any debris from this area
Other maintenance or service not included in the manual should be
performed by an authorized service representative.
Thank you for selecting a BISSELL product.
Please do not return this product to the store.
For any questions or concerns, BISSELL is happy to be of
service. Contact us directly at 1-800-237-7691.
WARNING:
to reduce the risk of fire, electric
shock, or injury,turn power
Off and disconnect plug from
electrical outlet before performing
maintenance or troubleshooting.