Blaupunkt 2000 DJ - Manual (Page 9)

50
/ Select track
up: Press briefly
CUE - fast forward (audible):
Hold pressed down
down: Press twice or repeatedly
briefly
To restart the track: Press briefly
REVIEW - fast reverse (audible):
Hold pressed down
Additional functions for the rocker
switch:
Other adjustments are possible with
AUD
8
DSC-MODE 7
PTY
as long as the corresponding function
is activated.
7 DSC (Direct Software Control)
Using DSC it is possible to adjust the
programmable basic settings.
Further information: “DSC program-
ming”.
8 AUD
Adjusts treble, bass, balance (left/
right), fader (front/rear) and Loudness.
Loudness = Boosts low frequency for
more bass and a better adjustment to
the human ear.
Kansas DJ, Chicago RCM 169:
For FM, AM, CD, AUX and TA it is
possible to store different treble, bass
and loudness settings.
How to make the settings:
Select the operating mode.
Press AUD once, “BASS” and the level
currently selected will appear in the
display.
Use << / >> to select the different
modes.
Use / to make the corresponding
settings.
The settings selected will appear in the
display. The setting selected last will
be stored automatically.
Special Loudness feature:
Press / to select the setting from
LOUD 6 to LOUD OFF.
Switching off AUD:
Press EXIT.
If you do not alter any of the settings,
AUD will switch off automatically after
8 seconds.
Additional feature
Switching the equaliser on/off (DPE
ON/OFF):
Press AUD for approx. 2 seconds.
“DPE ON” or “DPE OFF” will appear
briefly in the display.
For more information on the equaliser:
Refer to “Setting the equaliser”.
9 DIS
Selects different display modes.
Radio operation
Press DIS briefly:
- Name of the current radio station
- Current frequency
- PTY code
This will not work properly unless the
radio is able to receive an RDS station
in adequate reception quality.
Quick Reference
ChicHanKanMonParis gb 95%® 14.05.2002, 14:24 Uhr 50