Bravetti F1011H - Manual (Page 5)

OPERATION INSTRUCTIONS OPERATING INSTRUCTIONS
Before Using Your Deep Fryer
Make sure the deep fryer is unplugged
from electrical outlet. Wash the frying
basket and oil container in hot, soapy
water. Wipe dry thoroughly. Wipe the
removable heating control panel and
heating elements with a damp, soapy
cloth. Wipe dry thoroughly.
Note: Any water left in oil container or on
frying basket can cause heated oil to
splatter or “pop” during cooking. Special
care should be taken to ensure that the
oil filter in the removable cover is
completely dry, otherwise the filter will
not function properly. If not dry, steam
may be trapped within the fryer during
use and cause serious burns when
opened.
WARNING: Never plug in the deep
fryer before filling with oil. Always
unplug the appliance when not in use.
• Make sure the deep fryer is unplugged
and the oil has cooled (approximately 2
hours) before attempting to clean or
store the deep fryer.
• The oil does not need to be changed
after each use. We do not recommend
storing and reusing oil that was used for
frying high protein foods such as
poultry, fish or other meats. When oil is
mainly used to fry potatoes and is
filtered after each use, it can be used 8
to 10 times. However, do not use the
same oil for longer than 6 months.
• To filter the oil, first make sure the oil
has cooled and then empty the oil from
the oil container into a storage container
or bottle. (Fig. 6) wash and dry the oil
container and basket. To reuse, refill the
oil container with the oil, pouring the oil
through a wire strainer or paper filter.
(Fig. 7)
Storing used oil
Fig. 6
Filtering used oil
Fig. 7
To Store or Reuse Cooking Oil
WARNING: Always press the
“On/Off” button to stop the heating
element from heating and remove the
plug from the wall outlet before
cleaning. Allow the deep fryer and the
oil to cool completely (approximately 2
hours) before cleaning. Never
immerse the control panel, cord, plug
or main enclosure in water or any
other liquid.
Cleaning Instructions
• Please read and follow all
instructions in this manual for best
results with your deep fryer.
• Never immerse the control panel,
cord, plug or main enclosure in water
or any other liquid.
• Do not place the control panel, cord,
plug or main enclosure in the
dishwasher.
• Clean the control panel and main
enclosure only with a damp cloth.
• The oil container, frying basket and
cover can be washed in the top rack
of the dishwasher. To remove the
cover, open it and lift it straight up.
• Do not use any type of abrasive pad
or steel wool to clean the power
cord magnetic socket.
• Do not use alcohol or cleaning
solutions to clean deep fryer.
The following cooking times reflect only
the approximate time needed to fry one
basket 1/2 full. The exact time may be
different depending on actual quantity,
personal cooking preferences, size and
thickness of pieces, etc. In general, use
lower settings for delicate foods
(vegetables, fish) and higher settings
for frozen foods, French Fries and
chicken.
Temperature Settings
Food Cooking Time Temp.
French Fries 6-9 minutes 375 °F
Fish Fillets 3-5 minutes 320 °F
Chicken
Fingers
6-8 minutes 350 °F
Chicken
Pieces
13-20 minutes 350 °F
Fried Zucchini 3 minutes 320 °F
Fried
Mushrooms
3 minutes 320 °F
Onion Rings 3 minutes 320 °F
Donuts 3-5 minutes 350 °F
Apple
Beignets
4 minutes 350 °F
Shrimp 4-6 minutes 320 °F
3. Pour cooking oil into oil container.
Do NOT exceed “MAX” level for
cooking oil. (Fig. 2)
Max level
for cooking oil.
Fig. 2
4. Attach the “Break Away” power
cord. When attaching the power
cord, you will feel a magnetic pull
on the cord. (Fig. 3)
Assembling Your Deep Fryer
CAUTION: Never turn on the fryer when
the oil pan is empty. Always ensure the
fryer is out of the reach of children.
Always use fryer on a flat, heat
resistant surface.
1. Place oil container inside the base of
the deep fryer.
2. Slide the control panel with the
heating element downward until it
connects with the control panel
terminal on the outside of the fryer.
The automatic safety switch ensures
that the unit will not operate unless
the control panel has been inserted
correctly into the electric interface on
the control panel terminal. ( Fig. 1)
Fig. 3
5. Attach the basket handle to the
frying basket by pressing inward
on the side of the handle to
depress the handle shafts. Place
the handle shaft into the mating
slots inside the fryer basket, make
sure the ends are in place and
secure. (Fig. 4)
Fig. 4 Fig. 1
Control
Panel
Electronic
Interface
Press here to insert handle
shafts into basket
6 3