Britax Diplomat - Manual (Page 33)

31
Once child restraint has been installed in the
vehicle and adjustments have been made,
follow these instructions to secure child.
Loosen harness by pushing the adjuster
button located in front of the restraint,
then pull the shoulder straps forward (fig.
A).
Release chest clip by squeezing tabs and
sliding pieces apart (fig. B).
Unfasten harness buckle by pressing
release button and sliding tongues out.
Move harness straps to the side of
restraint.
Use harness holder located on straps and side of
cover to aid in holding straps.
Place child in restraint.
Position harness straps around child and
fasten harness buckle (fig. C) and chest
clip.
Proper connection of harness buckle is confirmed
with a positive click after inserting the second
buckle tongue.
Gently pull up on harness straps to tighten
lap section of harness which should fit
across child’s upper thighs.
Slowly pull adjuster strap to tighten
harness around the child (fig. D).
Position chest clip at middle of child’s
chest, level with child’s armpits (fig. E).
Verify that harness is not twisted and child
is properly secured.
1�
2�
3�
4�
•
5�
6�
•
7�
8�
9�
10�
Securing Your Child
A
B
C
Securing Your Child