BT 4000 Classic User Manual

Page 42

Diverse 4000 Classic ~10th Edition ~ 19th September ’01 ~ 4167

To set the dialling mode

You need only adjust this setting if
your switchboard does not operate
with the pre-set tone dialling. You
can change the dial mode to pulse
dialling.

Press the MENU options
button.

Press the DOWN button
until the display shows
BASE SET

Press the OK button.

Press the DOWN button
until display shows ADD
FEATURES

Press the OK button.
Display shows DIAL MODE.

Press the OK button.

Press the DOWN button to
select:

TONE

(with TBR)

PULSE

(with Earth Recall)

DTMF-EARTH

(tone with

Earth loop recall)

Press the OK button to
confirm. The display shows
SAVED

Press the RED PHONE
button until you reach the
idle screen.

To set the recall time

You need only adjust this setting
if your switchboard requires a
different recall time to the pre-set
recall time of 100 MS.

Press the MENU button.

Press the DOWN button
until the display shows
BASE SET

Press the OK button.

Press the DOWN button
until display shows ADD
FEATURES

Press the OK button.

Press the DOWN button
until display shows TBR.

Press the OK button.

Press the DOWN button to
select the flash time 80,
100

, 120, 180, 250 or 300ms.

Press the OK button to
confirm. The display
shows SAVED.

Press the RED PHONE
button until you reach the
idle screen.

Please note

100 MS is the standard setting for
most UK switchboards.

MENU

GENERAL

INFORMA

TION