Billion Electric Company BIPAC 2071 - Manual (Page 9)

Scenario 2: A BiPAC 2071 / 2072 device wants to join an existing network
group BC
Device A wants to join a network group “BC” currently consisting of device B
and device C. Any devices within the “BC” group can become the “Broadcast
State” and device A will be the “Join State”.
Example:
1. Hold down the Sync Button of device B or C of the BC network group for 1~3
seconds to turn it into Broadcast State.
2. Hold down the Sync Button of device A for 1~3 seconds to turn it into Join State.
3. Wait for the Sync LED of both devices A and (B or C) to light up then you will
now have device A join the BC network group.
Note: Once the device is plugged into the electric socket, connect it with an
Ethernet cable within 60 seconds to prevent the device from Auto Power Off.
Scenario 3: A BiPAC 2071 / 2072 device A of network group AD wants to
join an existing network group BC.
For a device which already belongs to a network group is to join with a different
network group, that device has to be ungrouped from its current attached group
first.
Example:
1. Hold down the Sync Button of device A for more than 10 seconds to ungroup it
from network group AD.
2. Then hold down the Sync Button of device (B or C) of network group BC for
1~3 seconds to turn it to Broadcast State.
3. Hold down the Sync Button of device A again for 1~3 seconds to turn it to Join
State.
4. Wait for the Sync LED of both devices A and (B or C) to light up. Now you will
have device A join the network group BC.
Note: Once the device is plugged into the electric socket, connect it with an
Ethernet cable within 60 seconds to prevent the device from Auto Power Off.