Billion Electric Company BIPAC 2071 - Manual (Page 6)

Hardware Overview
BiPAC 2071 BiPAC 2072
Ethernet Port
Power Plug
AC Outlet / AC
Pass-thru
(only available in
BiPAC 2072 model)
Reset Button
Sync Button
ETH LED
1.0 DET LED
Power LED
PLC LED
The Description of each labeled part is described in the table below.
AC Outlet / AC Pass-thru
(only available in BiPAC
2072 model)
Enable the plugging in of another Ethernet device for
direct power supply.
The AC Pass-thru allows the filtering of noise to
prevent HomePlug AV Network interference.
Note: The AC Outlet only support devices that use
6A (maximum) electric current.
1.0 DET LED
Blink when detect the presence of other HomePlug 1.0
devices that have the transmission rate of 14 or 85
Mbps.
Note: Due to the incompatibility of HomePlug AV
200 with HomePlug 1.0 devices, the presence of the
HomePlug 1.0 devices within the powerline network
will thus reduce the performance of your powerline
network.
Power LED
Lit when the device is power on.
PLC (Powerline Link/Act)
LED
Lit when a network has been established. Blink when
powerline data is transmitted or received.