Black Box BRI-HUB ISU2011-4-EURO - Manual (Page 7)

7
BRI-Hub
TECHNICAL: 0118 931 2233
Environmental and Safety Notes
The device conforms to all european and international standards for safety, environment,
EMC and the ISDN basic rate interface.
Power Supply
• The power adaptor is according to safety class II (VDE 0551) and my only be used
indoor.
• Do not use the power adaptor when it was brought from a cold to a warm
environment. In that case condensing water may damage the unit.
• There are no user serviceable part inside the power adaptor. Therefore it is not
necessary to open the unit
Sound Emission
The unit does not emit any sound.
Parts List
When opening your BRI-Hub the following parts should be present:
• BRI-Hub unit
• ISDN cable with two RJ45 plugs (Western plugs) to connect the BRI-Hub to the
network termination (NT) or the PABX basic rate interface. The cable has a length of
2m.
• Power Supply adaptor (not with BRI-Hub-S)
• Users Manual
• Two 6mm dowels and two 6mm screws for wall mounting
The power feeding unit, The Phantom Feed, may be used to feed all TE ports with power
(40V, 8W). This device is available as an option.