Bryston Electronic Crossover 10B LR - Manual (Page 4)

2 3
The Bryston PowerPac Amplifiers are a modular monaural
version of our very popular stereo amplifiers but designed to
be utilized in applications where portability, sound quality
and flexibility are of prime importance.
The PowerPac Amplifiers are a perfect choice for use as a
portable power amplifier which can be attached directly to
the rear of your loudspeaker. This provides for the use of very
short speaker leads resulting in a much improved loudspeaker/
amplifier interface. The PowerPac Amplifiers can also be bolted
on the wall for utilization in audio/video surround systems
(left/right/center/rears/backs) where a non-conspicuous
power module is required. A further application would be in
multi-room audio systems where single or multiple amplifiers
are needed to provide music in adjacent rooms. Finally, with
the recent popularity in passively or actively amplifying the
individual drivers in your stereo loudspeakers the Bryston
PowerPac’s would be ideal for use in this capacity.
POWERPAC 120 SST MONAURAL AMPLIFIER
The Bryston PowerPac 120-SST amplifier, is a superior quality,
modular, single channel power amplifier delivering 120 watts
at 8 Ohms, or 200 watts into 4 Ohms. The PowerPac 120-SST
is essentially a monaural version of our very popular 3B-SST
stereo amplifier but intended for use in applications where
portability and flexibility are of prime importance.
POWERPAC 300 SST MONAURAL AMPLIFIER
The Bryston PowerPac 300-SST amplifier, is a superior quality,
modular, single channel power amplifier delivering 300 watts
at 8 Ohms, or 400 watts into 4 Ohms. The PowerPac 300-SST
is essentially a monaural version of our very popular 4B-SST
stereo amplifier but intended for use in applications where
portability and flexibility are of prime importance.
VERSATILE FEATURES
• Allows direct attachment or adjacent placement
to loudspeakers.
• On-wall mounting.
• Easy application in any multiple driver active or passive
stereo system.
• Balanced or unbalanced operation at the flick of a switch.
• Gold plated 5-way banana jacks, RCA and XLR
connectors.
• Level control adjustment.
• Detachable power cord.
POWERPAC SPECIFICATIONS
SLEWING RATE
Greater than 60 volts per microsecond
POWER BANDWIDTH
Less than 1Hz to over 100kHz
DAMPING FACTOR
Over 500 at 20Hz, ref. 8 ohms
IMPEDANCE
50k unbalanced, 20k balanced
FEATURES
• Regulated power supplied to all voltage gain stages
• Gold plated input and output connectors
• Switchable balanced XLR -1/4” and RCA unbalanced inputs
• Remote power turn-on. 12 v AC/DC
• Power Clipping Indicator
POWERPAC SST MONAURAL AMPLIFIERS
POWER PAC 60 ST MONAURAL AMPLIFIER
The Bryston PowerPac 60-ST amplifier, is a no-compromise,
modular, single channel power amplifier delivering 60 watts at 8
Ohms, or 100 watts into 4 Ohms. The PowerPac 60 is a modular
monaural version of our very popular 2B-LP stereo amplifier
but designed to be utilized in applications where portability,
sound quality and flexibility are of prime importance.